3 Axles 40000L Semi Trailer Tank
3 axles 40000l semi trailer tank is one types of semi trailer tanks to transport liquid, such as crude oil, fuel, and alcohol. The 40000l volume tank can be divided into several compartments as you need. Carbon steel 3 axles 40000l semi trailer tank is popular in Africa and Asia.
How To Choose Semi Trailer Tank
Usually, 3 axles 40000L semi trailer tank is the common type and popular one.
In order to pick the proper semi trailer tank, you better let your suppliers know what kind of material do you transport, how many compartments do you need. This way, our suppliers can decide what kind of material semi trailer tanks to offer and whether your semi trailer tank need thermal.
3 Axles 40000L Semi Trailer Tank Specification
Carbon Steel ; Sphere end plate, Dish end thickness 5mm. Tank shell thickness 6mm
3” , 2pcs
3 inch rubber hose with hose carriers, 2 pc, 6m/each
Method Of Loading And Unloading:
On the top
Anti-explosion type manhole, aluminum, 2pcs, diameter 500mm.
2” and 3.5” removable Kingpin, bolted in type
4 inch Pneumatic aluminum valve, 1pc, China brand
Hydrostatic test to 5 psi (35 Kpa) on each compartment
All welding are to be done by qualified welder per applicable national standard
Shot blast at Standard SA 2.5 prior to application of primer, polyurethane top coat. Total DFT not less than 100um
As the photo that the customer provide
Common mechanical suspension, leaf spring 10pcsx13mmx90mm, China
FUWA, 3pcs*13 ton capacity with ABS
Dual line pneumatic brake, SAE hose and connector
4 double chambers and 2 single chambers, China with saddle stops
Linglong 12R22.5. 12 pieces
9.0 steel disc wheel, 10 holes ISO, 12 pcs. China
CIMC Standard 28T one speed telescopic manual landing gear
Emergency relay valve:
40L, 2 pcs, China
7 way socket SAE standard, China
Front marker lamp:
Side marker lamp:
White & Red
Turn signal lamp:
Per customer requirement
Electric cable protected by PVC conduit on main frame
Spare wheel carriers:
2 units per trailer
Aluminum mud guard
One piece, carbon steel
The specification above is our standard one, If you have your own requirement, you can let me know, we can customize the semi trailer tanks based on customer requirements.
Semi Trailer Tank European System
The European system of the tanker includes:
Bottom loading and unloading system
Exhaust gas recovery system
As the below picture shows:
The three identical valves on the left (with the handle facing up on the right side of the valve body) are the lower loading/unloading valves, one for each bin.
The valve on the far right without a handle is called the oil and gas recovery joint, one for each vehicle.
The blue one in the upper part of the valve box is called the anti-overflow probe socket.
The upper part of the right side of the valve box is the subsea valve air control combination switch, the three warehouses are four switches, the left side is the main switch, and the right side is the one, two and three warehouse switches.
The red one on the far left is the reverse electrostatic reel, which is used to reverse static electricity when loading and unloading, and has nothing to do with oil and gas recovery.
The two switches on the upper part of the valve box are the active guardrail switches, and the active guardrail switches are the switches of the top pneumatic guardrail. Not directly related to oil and gas recovery.
This is an aluminum alloy explosion-proof manhole cover
The long switch is a small hole cover, which can be opened for loading.
The blue wire harness is the anti-overflow probe, which is used to detect whether the liquid level reaches the probe position when filling the material. It is used in conjunction with the anti-overflow socket, and the wire harness is connected to the anti-overflow socket.
The white installation holes are for the oil and gas recovery valve. The oil and gas recovery valve is the same as the manhole cover. There is one for each bin. The oil and gas recovery valve can be installed on the manhole cover (the oil and gas recovery valve installed on the manhole cover is as shown in the above picture The blue label shown with black probe) can also be installed on the tank (as shown in the picture below, it is installed on the tank). Recover the gas in the tank. The small black cover on the manhole cover is on the mounting hole for the dipstick.
The breathing valve is installed on the tank next to the manhole cover, and some customers need to install it additionally. The general aluminum alloy explosion-proof manhole cover comes with a built-in breathing valve.
The one in this picture is the oil and gas recovery valve installed on the aluminum alloy explosion-proof manhole cover.
No matter where it is installed, the functionality is the same.
3 Axles Aluminum Trailer Tank Aluminium
This is the tank body of a 3 axles 40000L semi trailer tank. The material is aluminum. This aluminum tank is divided to 3 compartments. This 4000L semi trailer tank is used for transporting alcohol. The blue membrane covered on the tank is the protector, we will peel it off after installation of the chassis. After peeling off the membrane, the tank looks like a mirror.